# Grabbable Held Joint

This component can be used to create a stable held joint within a single rigidbody structure. An object made out of multiple colliders with the same rigidbody and a different grabbable component on each collider, can use this held joint to create a linear joint that is only active when being held.&#x20;

This is generally much more stable than a traditional Rigidbody joint and does not run into issues when being forced into static surfaces. Good for things like the slide on a gun

(For an example check the slide on the rifle in the demo)

<div align="left"><figure><img src="https://2959669391-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5zKO0EvOjzUDeT2aiFk3%2Fuploads%2FaRFhM7wKXVxKgyR594fV%2Fimage.png?alt=media&#x26;token=2bb792b7-9601-436b-8c46-27dcf436fd9d" alt=""><figcaption></figcaption></figure></div>

`Connected Grabbable` The grabbable that this grabbable is connected to

`Pivot Offset` Offsets the center of this joint

`Held Mass Scale` This will multiply the hands strength while holding this grabbable to give it more or less positional priority while holding this joint as a second hand (good to reduce when you dont want this joint having movement priority while being held)

`Max Limit` The maximum distance this joint is allowed to move in the local positive axis&#x20;

`Min Limit` The maximum distance this joint is allowed to move in the local negativeaxis

`Spring` This will force the joint back into its center position based on the given spring strength while not being held along this axis

`Event Offset` The percentage from the min/max distance needed to trigger the event, good for creating a buffer for the event to trigger slightly before the max range to help prevent missed event

